Netgear R6900 - Nighthawk AC1900 Smart WiFi Router Manual Do Utilizador
Connect to the Router
During and after installation, you can connect to the router’s network through a wired or WiFi connection. If you set
up your computer to use a static IP address, change the settings of your computer so that it uses Dynamic Host
Configuration Protocol (DHCP).
up your computer to use a static IP address, change the settings of your computer so that it uses Dynamic Host
Configuration Protocol (DHCP).
Connect to the Router Through an Ethernet Cable
You can connect your computer to the router using an Ethernet cable and join the router’s local area network (LAN).
To connect your computer to the router with an Ethernet cable:
1.
Make sure that the router is receiving power (its Power LED is lit).
2.
Connect an Ethernet cable to an Ethernet port on your computer.
3.
Connect the other end of the Ethernet cable to one of the numbered Ethernet ports.
Your computer connects to the local area network (LAN). A message might display on your computer screen
to notify you that an Ethernet cable is connected.
to notify you that an Ethernet cable is connected.
Join the WiFi Network of the Router
Choose either the manual or the WPS method to add a WiFi device such as a computer, iPhone, iPad, or gaming
device to the WiFi network of the router.
device to the WiFi network of the router.
Manual Method
On the WiFi device that you want to connect to the router, you can use the software application that manages your
WiFi connections.
WiFi connections.
To connect a device manually to the WiFi network of the router:
1.
Make sure that the router is receiving power (its Power LED is lit).
2.
On the WiFi device that you want to connect to your router, open the software application that manages your
WiFi connections.
WiFi connections.
This software scans for all WiFi networks in your area.
3.
Look for the router’s network and select it.
Connect to the Network and Access the Router
20
Nighthawk AC1900 Smart WiFi Router Model R6900