Netgear R6900 - Nighthawk AC1900 Smart WiFi Router Manual Do Utilizador

If you did not change the name of the network during the setup process, look for the default WiFi network name
(SSID) and select it. The default SSID is on the product label.

Enter the router WiFi password.

The default WiFi password (also referred to as the network key or passphrase) is also on the product label.

Click the Connect button.

The device connects to the WiFi network of the router.

Wi-Fi Protected Setup (WPS) is a standard for easily adding computers and other devices to a home network while
maintaining security. To use WPS (Push 'N' Connect), make sure that all WiFi devices to be connected to the network
are Wi-Fi certified and support WPS. During the connection process, the client gets the security settings from the
router so that every device in the network supports the same security settings.

Make sure that the router is receiving power (its Power LED is lit).

Check the WPS instructions for your computer or WiFi device.

Press the WPS button of the router for three seconds.

Within two minutes, press the WPS button on your WiFi device, or follow the WPS instructions that came with
the device.

The WPS process automatically sets up the device with the network password and connects the device to the
WiFi network of the router.

For more information, see 

 on page 161.

Separate types of logins serve different purposes. It is important that you understand the difference so that you know
which login to use when.

Several types of logins are associated with the router: