Netgear R8000 - Nighthawk X6—AC3200 Tri-Band WiFi Gigabit Router Manual Do Utilizador
Network Settings
118
Nighthawk
X6
AC3200
Tri-Band
WiFi Router
Disable LED Blinking or Turn Off LEDs
The router LEDs on the top panel indicate router activities and behavior. You can disable
LED blinking for network communications, or turn off all LEDs except the Power LED.
LED blinking for network communications, or turn off all LEDs except the Power LED.
To disable LED blinking or turn off the LEDs:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3.
Enter the router user name and password.
The user name is admin. The default password is password. The user name and
password are case-sensitive.
password are case-sensitive.
The BASIC Home screen displays.
4.
Select ADVANCED > Advanced Setup > LED Control Settings.
The LED Control Settings screen displays.
By default, the Enable blinking on Internet LED, LAN LED, Wireless LED and USB
LED when data traffic is detected radio button is selected, which allows standard LED
behavior. For information about standard LED behavior, see
LED when data traffic is detected radio button is selected, which allows standard LED
behavior. For information about standard LED behavior, see
10.
5.
To disable blinking, select the Disable blinking on Internet LED, LAN LED, Wireless LED
and USB LED when data traffic is detected radio button.
6.
To turn off the LEDs, select the Turn off all LEDs except Power LED radio button.
7.
Click the Apply button.
Your change takes effect.
View WAN Settings
You can view or configure wide area network (WAN) settings for the Internet port. You can
set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and
enable the router to respond to a ping to its WAN (Internet) port.
set up a DMZ (demilitarized zone) server, change the maximum transmit unit (MTU) size, and
enable the router to respond to a ping to its WAN (Internet) port.
To view the WAN settings:
1.
Launch an Internet browser from a computer or wireless device that is connected to the
network.
2.
Type http://www.routerlogin.net or http://www.routerlogin.com.
A login screen displays.
3.
Enter the router user name and password.