Netgear WC7520 - ProSafe 20-AP Wireless Controller Manual De Referência
Managing Security Profiles and Profile Groups
82
ProSafe 20-AP Wireless Controller WC7520
Shared Key
64-bit WEP
128-bit WEP
152-bit WEP
To configure Shared Key authentication with WEP:
1. From the Data Encryption drop-down list, select a level of
WEP encryption:
- 64-bit WEP. Uses 40/64-bit encryption.
- 128-bit WEP. Uses 104/128-bit encryption.
- 152-bit WEP. A proprietary mode that works only with other
wireless devices that support this mode.
2. Select a key radio button (Key1, Key2, Key3, or Key4).
3. Enter a key in the corresponding field:
- 64-bit WEP requires a key with 10 characters.
- 128-bit WEP requires a key with 26 characters.
- 152-bit WEP requires a key with 32 characters.
Legacy 802.1x
None
To configure legacy 802.1x authentication:
1. Set up and enable an internal or external (RADIUS or LDAP)
authentication server. For information, see
2. Select the Local or External radio button.
3. If you select the External radio button, select the
authentication server that you wish to use from the
drop-down list.
drop-down list.
WPA with Radius
TKIP
TKIP + AES
To configure WPA authentication with a RADIUS server:
1. Set up and enable an internal or external (RADIUS or LDAP)
authentication server. For information, see
2. From the Data Encryption drop-down list, select the type of
encryption:
- TKIP. Supports Temporal Key Integrity Protocol (TKIP) only.
- TKIP + AES. Supports both TKIP and Advanced
Encryption Standard (AES).
3. Select the Local or External radio button.
4. If you select the External radio button, select the
authentication server that you wish to use from the
drop-down list.
drop-down list.
Table 16. Network authentication and data encryption settings (continued)
Network authentication
selection
Data encryption
options
Configuration steps