Netgear WC7520 - ProSafe 20-AP Wireless Controller Manual De Referência

Managing Security Profiles and Profile Groups

ProSafe 20-AP Wireless Controller WC7520

Configure Security Profiles for Advanced Profile Groups

The advanced Profile Group screen lets you create up to 8 profile groups. For each profile
group you can create and configure up to 8 security profiles per wireless radio (8 profiles for a
single-band access point; 16 profiles for a dual-band access point). Separate profiles are
applied to 802.11b/bg/ng-mode and 802.11a/na-mode radios.

By default, all access points are assigned to the basic profile group. After you have created
advanced profile groups, you can use the WLAN Network screen to reassign access points to
any of these advanced profile groups (see

Manage Basic and Advanced Profile Groups in the

WLAN

on page 87).



To add a profile group, configure a new profile, and then add another profile:

Select Configuration > Profile > Advanced > Radio. The Profile Groups screen
displays:

Figure 38.

WPA-PSK & WPA2-PSK

Note:

Use this option if

there are both WPA-PSK
and WPA2-PSK clients in
the network.

AES

TKIP + AES

To configure WPA-PSK & WPA2-PSK authentication, type a
passphrase of at least 8 characters in the WPA Passphrase
(Network Key) field.

Note:

The Data Encryption drop-down list displays TKIP + AES,

which is the only available option. Both TKIP and AES are
supported.

Table 16. Network authentication and data encryption settings (continued)

Network authentication

selection

Data encryption

options

Configuration steps

Click + to add another profile group.