Netgear FVS318v2 – Cable/DSL ProSafe VPN Firewall with 8-Port Switch Manual De Referência
Reference Manual for the Model FVS318 Broadband ProSafe VPN Firewall
5-14
Advanced WAN and LAN Configuration
M-10146-01
a.
Click the Edit button to open the Edit Menu, shown in
Figure 5-6: Static Route Entry and Edit Menu
b.
Type a route name for this static route in the Route Name box under the table.
This is for identification purpose only.
c.
Select Active to make this route effective.
d.
Select Private if you want to limit access to the LAN only.
The static route will not be reported in RIP.
e.
Type the Destination IP Address of the final destination.
f.
Type the IP Subnet Mask for this destination.
If the destination is a single host, type 255.255.255.255.
g.
Type the Gateway IP Address, which must be a router on the same LAN segment as the
Firewall.
Firewall.
h.
Type a number between 1 and 15 as the Metric value.
This represents the number of routers between your network and the destination. Usually,
a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
a setting of 2 or 3 works, but if this is a direct connection, set it to 1.
4.
Click Apply to have the static route entered into the table.