Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Guia Do Programa
OSPF and OSPFv3
430
M6100, M5300, and M7100 Series Managed Switches
The following table describes the nonconfigurable data that is displayed.
Configure the OSPFv3 NSSA Area
To configure the OSPFv3 NSSA area:
1.
Prepare your computer with a static IP address in the 169.254.100.0 subnet, for
example, 169.254.100.201.
2.
Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet port on
the switch.
3.
Launch a web browser.
4.
Enter the IP address of the switch in the web browser address field.
The default IP address of the switch is 169.254.100.100.
The Login screen displays.
5.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
6.
Click the Login button.
The web management interface menu displays.
7.
Select Routing > OSPFv3 > Advanced > NSSA Area Configuration.
Table 159. Advanced OSPFv3 Stub Area Configuration
Field
Description
SPF Runs
The number of times that the intra-area route table was calculated using
this area's link state database. This is done using Dijkstra's algorithm.
this area's link state database. This is done using Dijkstra's algorithm.
Area Border Router Count
The total number of area border routers reachable within this area. This
is initially zero, and is calculated in each SPF Pass.
is initially zero, and is calculated in each SPF Pass.
Area LSA Count
The total number of link state advertisements in this area's link state
database, excluding AS External LSAs.
database, excluding AS External LSAs.
Area LSA Checksum
The 32-bit unsigned sum of the link state advertisements' LSA
checksums contained in this area's link state database. This sum
excludes external (LSA type 5) link state advertisements. The sum can
be used to determine if there was a change in a router's link state
database, and to compare the link state database of two routers.
checksums contained in this area's link state database. This sum
excludes external (LSA type 5) link state advertisements. The sum can
be used to determine if there was a change in a router's link state
database, and to compare the link state database of two routers.
Type of Service
This field is the normal ToS associated with the stub metric.