Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Guia Do Programa
OSPF and OSPFv3
431
M6100, M5300, and M7100 Series Managed Switches
8.
In the Area ID field, enter the OSPF area ID.
An area ID is a 32-bit integer in dotted-decimal format that uniquely identifies the area to
which a router interface connects.
9.
Configure the Import Summary LSAs by selecting Enable or Disable from the list.
If you select Enable, summary LSAs are imported into stub areas.
10.
Configure the Default Information Originate.
This option permits you to advertise a default route into the NSSA when import summary
LSAs are disabled. This can also be applied by the CLI command area (area-id) NSSA
default-info-originate
LSAs are disabled. This can also be applied by the CLI command area (area-id) NSSA
default-info-originate
in the IP router OSPF config mode.
a.
In the Admin Mode list, select to Enable or Disable the default information originate.
b.
In the Metric Value field, set the default metric value for default information
originate. The value range of values is 1 to 16777214.
c.
In the Metric Type field, select the type of metric specified in the Metric Value field.
Options are as follows:
•
Comparable Cost.
External type 1 metrics that are comparable to the OSPF
metric.
•
Non-comparable Cost
. External type 2 metrics that are assumed to be larger
than the cost of the OSPF metric.
11.
Select the Translator Role of the NSSA.
Options are as follows:
a. Always
. Cause the router to assume the role of the translator the instant it becomes a
border router.
b. Candidate
. Cause the router to participate in the translator election process when it
attains border router status.
12.
In the Translator Stability Interval field, configure the translator of the NSSA.