Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Netgear
  4. M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch
  5. Guia Do Administrador

Netgear M7100-24X (XSM7224) - ProSAFE 24 Ports 10G Fully Managed L2 Switch Guia Do Administrador

Download
Página de 721
Switch Stacks 
486
Managed Switches 
Stack Switches Using 10G Fiber
Switch A
AX741 module
AX741 module
Switch B
This example shows how to stack two switches in different buildings at long distance using 
10G fiber. 
Figure 50. Using 10G fiber to stack switches in different buildings
To set up a stack between two switches in different buildings at long distance:
1. 
Insert AX741 modules into both switches.
2. 
Connect the AX741 modules with a fiber cable.
3. 
Configure the Switch A and Switch B as described in one of the following sections:
•
•
CLI: Stack Switches Using 10G Fiber
1. 
On Switch A, display the stack port information.
(Netgear Switch) #show stack-port
                                       Configured  Running             Link
                                        Stack      Stack     Link      Speed
Unit  Intf  SlotId   Type  XFP Adapter  Mode       Mode      Status    (Gb/s)
---- ------ ------- -----  -----------  ---------  --------  --------  --------
1     0/51                 None         Ethernet   Ethernet  Link Down   12
1     0/52                 AX741        Stack      Stack     Link Down    0
Because port 1/0/52 is already configured as a stack port, no action is required.