Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa
Switch Software Log Messages
1100
M4200 and M4300 Series ProSAFE Managed Switches
Stacking
DVMRP
DVMRP protocol initialization sequence Failed.
This could be due to the non-availability of some
resources. This message appears when trying to
enable DVMRP Protocol.
resources. This message appears when trying to
enable DVMRP Protocol.
DVMRP
DVMRP All Routers Address - xxx Delete from
the DTL Mcast List Failed for intf – xxx.
the DTL Mcast List Failed for intf – xxx.
DMVRP All Routers Address deletion from the local
multicast list Failed. As a result of this, DVMRP
Multicast packets are still received at the application
though DVMRP is disabled.
multicast list Failed. As a result of this, DVMRP
Multicast packets are still received at the application
though DVMRP is disabled.
DVMRP
Mcast Forwarding Mode Disable Failed for intf –
xxx.
xxx.
The Multicast Forwarding mode Disable Failed for
this routing interface.
this routing interface.
DVMRP
DVMRP All Routers Address - xxx Add to the
DTL Mcast List Failed for intf – xxx.
DTL Mcast List Failed for intf – xxx.
DMVRP All Routers Address addition to the local
multicast list Failed. As a result of this, DVMRP
Multicast packets with this address will not be
received at the application.
multicast list Failed. As a result of this, DVMRP
Multicast packets with this address will not be
received at the application.
DVMRP
Mcast Forwarding Mode Enable Failed for intf –
xxx.
xxx.
The Multicast Forwarding mode Enable Failed for
this routing interface. As a result of this, the ability to
forward Multicast packets does not function on this
interface.
this routing interface. As a result of this, the ability to
forward Multicast packets does not function on this
interface.
DVMRP
DVMRP Probe Control message Send Failed on
rtrIfNum – xxx.
rtrIfNum – xxx.
DVMRP Probe control message send failed. This
could mostly be because of a Failure return status of
the socket call sendto(). As a result of this, the
DVMRP neighbor could be lost in the neighboring
DVMRP routers.
could mostly be because of a Failure return status of
the socket call sendto(). As a result of this, the
DVMRP neighbor could be lost in the neighboring
DVMRP routers.
DVMRP
DVMRP Prune Control message Send Failed;
rtrIfNum – xxx.
rtrIfNum – xxx.
Neighbor - %s, SrcAddr - %s, GrpAddr - %s DVMRP
Prune control message send failed. This could
mostly be because of a Failure return status of the
socket call sendto(). As a result of this, the unwanted
multicast traffic is still received and forwarded.
Prune control message send failed. This could
mostly be because of a Failure return status of the
socket call sendto(). As a result of this, the unwanted
multicast traffic is still received and forwarded.
DVMRP
DVMRP Probe Control message Send Failed on
rtrIfNum –xxx.
rtrIfNum –xxx.
DVMRP Probe control message send failed. This
could mostly be because of a Failure return status of
the socket call sendto(). As a result of this, the
DVMRP neighbor could be lost in the neighboring
DVMRP routers.
could mostly be because of a Failure return status of
the socket call sendto(). As a result of this, the
DVMRP neighbor could be lost in the neighboring
DVMRP routers.
Table 69. EDB Log Message
Component
Message
Cause
EDB
EDB Callback: Unit Join: num.
Unit num joined the stack.
Table 68. DVMRP Log Messages (continued)
Component
Message
Cause