Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

Use this command to display all the configured terminal length values.

(NETGEAR Switch) #show terminal length 

Terminal Length:

----------------------

For Current Session………………….24

For Serial Console…………………… 24

For Telnet Sessions………………….24

For SSH Sessions…………………….. 24

Use this command to get notifications when the CPU free memory falls below the configured 
threshold. A notification is generated when the free memory falls below the threshold. 

Another notification is generated once the available free memory rises to 10 percent above 

the specified threshold. To prevent generation of excessive notifications when the CPU free 
memory fluctuates around the configured threshold, only one Rising or Falling memory 
notification is generated over a period of 60 seconds. The threshold is specified in kilobytes. 
The CPU free memory threshold configuration is saved across a switch reboot.

This section describes the switch services commands. Switch services are services that 
provide support for features such as temperature, power supply status, fan control, and 
others. Each of these services is platform dependent. (For example, some platforms may 
have temperature sensors, but no fan controller. Or, others may have both while others have 
neither.) 

Format

show terminal length

Mode

Privileged EXEC

Format

memory free low-watermark processor threshold

Mode

Global Config

 threshold

When CPU free memory falls below this threshold, a notification message is triggered. The range is 
1–1017416 (the maximum available memory on the switch). The default is 0 (disabled).