Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

Power supplies:

Module Failures

------ --------

1      0

2      0

3      0

4      0

5      0

6      0

7      0

8      0

This command displays information about the health and statistics of the i2c bus. The unit 
parameter specifies the unit in which a member is installed.

To display the debug trace, enable the 

 command.

This section describes the commands you use to configure system logging, and to view logs 
and the logging settings.

This command enables logging to an in-memory log. You can specify the severity level value 
as either an integer from 0 to 7 or symbolically through one of the following keywords: 
emergency

 (0), alert (1), critical (2), error (3), warning (4), notice (5), info (6), 

or debug (7). 

This command disables logging to in-memory log.

Format

debug i2c unit 

Mode

Privileged EXEC

Default

disabled; notice (5) when enabled

Format

logging buffered [severitylevel]

Mode

Global Config

Format

no logging buffered

Mode

Global Config