Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa
Utility Commands
310
M4200 and M4300 Series ProSAFE Managed Switches
no sw reset
Use this command to prevent the switch from rebooting after a serious error occurred.
Preventing the switch from rebooting can be useful for the purpose of debugging.
Preventing the switch from rebooting can be useful for the purpose of debugging.
show sw reset
Use this command to show whether the sw reset command is enabled.
Support Mode Commands
Support mode is hidden and available when the techsupport enable command is
executed. The tech support mode is disabled by default. Configurations related to support
mode are shown in the show tech-support command. They can be persisted by using the
command save in support mode. Support configurations are stored in a separate binary
config file, which cannot be uploaded or downloaded.
executed. The tech support mode is disabled by default. Configurations related to support
mode are shown in the show tech-support command. They can be persisted by using the
command save in support mode. Support configurations are stored in a separate binary
config file, which cannot be uploaded or downloaded.
techsupport enable
Use this command to allow access to Support mode.
console
Use this command to enable the display of support debug for this session.
Format
no sw reset
Mode
Global Config
Format
show sw reset
Mode
User EXEC
Default
Disabled
Format
techsupport enable
Mode
Privileged Exec
Default
Disabled
Format
console
Mode
Support