Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

This command causes a service to remove its reference to the policy. 
This command effectively disables DiffServ on an interface in the 
inbound direction or an interface in the outbound direction. There is 
no separate interface administrative 'mode' command for DiffServ.

Use the DiffServ show commands to display configuration and status information for classes, 
policies, and services. You can display DiffServ information in summary or detailed formats. 
The status information is only shown when the DiffServ administrative mode is enabled.

This command displays all configuration information for the specified class. The

is the name of an existing DiffServ class.

If the class-name is specified the following fields are displayed.

Format

no service-policy {in | out} policymapname

Modes

Global Config

 

Interface Config

 

Format

show class-map class-name

Modes

Privileged EXEC

User EXEC

Class Name

The name of this class.

Class Type

A class type of all means every match criterion defined for the class is evaluated simultaneously and 

must all be true to indicate a class match. 

Class Layer3 
Protocol

The Layer 3 protocol for this class. Possible values are IPv4 and IPv6.

Match Criteria

The Match Criteria fields are only displayed if they have been configured. Not all platforms support 
all match criteria values. They are displayed in the order entered by the user. The fields are 
evaluated in accordance with the class type. The possible Match Criteria fields are: Destination IP 

Address, Destination Layer 4 Port, Destination MAC Address, Ethertype, Source MAC Address, 

VLAN, Class of Service, Every, IP DSCP, IP Precedence, IP TOS, Protocol Keyword, Reference 
Class, Source IP Address, and Source Layer 4 Port.

Values

The values of the Match Criteria.