Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Administrador

The following commands assume that the switch already has a defined a routing interface 
with a network address of 10.10.10.0, and is configured so that all packets destined for 
network 10.10.100.0 take the path of routing port.

To delete the static route, simply add the no keyword in the front of the ip route command.

Select Routing > Routing Table > Basic > Route Configuration.

A screen similar to the following displays.

In the Route Type list, select Static.

Fill in the Network Address field. 

Note that this field should have a network IP address, not a host IP address. Do not enter 
something like 10,100.100.1. The last number should always be 0 (zero).

In the Subnet Mask field, enter a value that matches the subnet range that you want to use.

The Preference field is optional. A value of 1 is entered by default if you do not enter a 
number.

Click the Add button on the bottom of the screen. The screen is updated with the static 
route shown in the routing table.

To remove a route entry, either static or default, select the check box to the left of the entry, 
and click the Delete button on the bottom of the screen.

(FSM7328S) #show ip route

Total Number of Routes............................1

Network     Subnet                   Next Hop    Next Hop

Address     Mask           Protocol  Intf        IP Address

----------  -------------  --------  ----------  -----------

10.10.10.0  255.255.255.0  Local     1/0/3       10.10.10.1