Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa

Request an IP address, configuration file name, and TFTP IP address from the DHCP 
server:

(Netgear switch) #

Config file 'startup-config' created successfully.

AutoInstalled configuration is saved.

(Netgear switch) #show autoinstall

AutoInstall Mode.............................. Stopped

AutoInstall Persistent Mode................... Enabled

AutoSave Mode................................. Disabled

AutoInstall Retry Count....................... 3

AutoInstall State............................. AutoInstall is 

completed.

Auto Install is now completed.

This section describes how to configure Auto Install through the web management interface.



Prepare your computer with a static IP address:

For access over an Ethernet network port, use a static IP address in the 
169.254.0.0/16 subnet.

For example, use 169.254.100.201 for your computer.

For access over the OOB port, use a static IP address in the 192.168.0.0/16 subnet.

For example, use 192.168.0.201 for your computer.

Connect an Ethernet cable from an Ethernet port on your computer to an Ethernet network 
port on the switch or to the OOB port on the switch.

Launch a web browser such as Google Chrome, Mozilla Firefox, or Microsoft Internet 
Explorer.

Enter the default IP address of the switch in the web browser address field:

For access over an Ethernet network port, enter 169.254.100.100.

For access over the OOB port, enter 192.168.0.239.

A login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.