Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Guia Do Programa
Use the Auto Install Configuration
28
M4200 and M4300 Series ProSAFE Managed Switches Software Setup Manual
6.
Click the Login button.
The web management interface menu displays.
7.
Select Maintenance > Save Config > Auto Install Configuration.
8.
From the AutoInstall Mode menu, select Start.
9.
From the AutoSave Mode menu, select Enabled.
10.
Click the Apply button.
Your settings are saved and the Auto Install process starts.
Monitor and Complete the Auto Install Process
When the switch boots in the absence of a saved configuration file, a message displays on
the console stating that the Auto Install procedure is beginning. A message displays when
the console stating that the Auto Install procedure is beginning. A message displays when
Auto Install is complete. The message also indicates that the configuration must be saved to
prevent Auto Install from being performed on the next reboot.
When Auto Install is successfully completed, the messages are in the buffered log, not on the
console. You can execute a show running-config command to validate the contents of
the configuration. You must be logged in as administrator.
console. You can execute a show running-config command to validate the contents of
the configuration. You must be logged in as administrator.
About Saving the Configuration
An administrator must explicitly save the downloaded configuration in nonvolatile memory so
that the configuration is available on the next reboot. If you are using the CLI, first make sure
that the configuration is correct, and then enter the copy running-config
startup-config
that the configuration is correct, and then enter the copy running-config
startup-config
command.
If the Host-Specific Configuration File Is Not Found
If the Auto Install process fails to download any configuration file, a message is logged. If a
final configuration file is not downloaded, the entire process repeats every 10 minutes.
final configuration file is not downloaded, the entire process repeats every 10 minutes.