Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Netgear
  4. M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3
  5. Manual Do Utilizador

Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

Download
Página de 700
Configure System Information 
112
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual 
The updated configuration is sent to the switch. Configuration changes take effect 
immediately.
The following table describes the PoE Configuration nonconfigurable fields.
Configure PoE Settings
To configure PoE settings: 
1. 
Launch a web browser.
2. 
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. 
Enter the user name and password. 
The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.
4. 
Click the Login button. 
The System Information page displays.
5. 
Select System > PoE > Advanced > PoE Configuration. 
Table 42.  PoE Configuration Nonconfigurable Fields  
Field
Description
Units
The Current PoE Unit. You can change the PoE Unit by selecting 
another unit ID listed here. 
Model
The model of the PoE card.
Host
The PoE host.
Firmware Version 
The firmware version of the PoE software component.
Power Status 
Indicates the power status. 
Total Power (Main AC)
The total power provided by the MAIN AC power source.
Total Power (RPS)
The total power provided by the redundant power source.
Power Source
Current source of system power (Main AC or RPS).
Threshold Power 
System can power up one port, if consumed power is less than this 
power. Consumed power can be between Nominal & Threshold Power 
values. The threshold power value is determined by the configurable 
System Usage Threshold percent.
Consumed Power 
Total amount of power in watts currently being consumed by connected 
PoE devices.