Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

You can specify LLDP-MED parameters that are applied to the switch.



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select System > LLDP > LLDP-MED > Global Configuration. 

In the Fast Start Repeat Count field, enter the number of LLDP PDUs that are transmitted 

when the protocol is enabled. 

The range is from (1 to 10). Default value of fast repeat count is 3.

The Device Class field specifies local device's MED classification. There are four 
different kinds of devices, three of them represent the actual end points (classified as 
Class I Generic [IP Communication Controller and so on], Class II Media [Conference 
Bridge and so on], Class III Communication [IP Telephone and so on]). The fourth device 
is Network Connectivity Device, which is typically a LAN Switch/Router, IEEE 802.1 
Bridge, IEEE 802.11 Wireless Access Point and so on.

Click the Apply button.

The updated configuration is sent to the switch. Configuration changes take effect 
immediately. 

System Name

Specifies model name of the remote device.

Remote Port ID

The port component associated with the remote system.