Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure System Information
133
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure LLDP-MED Interface
To configure LLDP-MED Interface
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select System > LLDP > LLDP-MED > Interface Configuration.
The Link Status field displays the link status of the port (up or down).
The Operational Status field displays whether the LLDP-MED TLVs are transferred on
this interface.
this interface.
6.
Use Go To Port to enter the Port in unit/slot/port format and click the Go button.
The entry corresponding to the specified Port, is selected.
7.
Use Interface to specify the list of ports on which LLDP-MED - 802.1AB can be configured.
8.
Use MED Status to specify whether LLDP-MED mode is enabled or disabled on this
interface.
9.
Use Notification Status to specify the LLDP-MED topology notification mode of the
interface.
10.
Use Transmit Type Length Values to specify which optional type length values (TLVs) in
the LLDP-MED is transmitted in the LLDP PDUs frames for the selected interface:
•
MED Capabilities
. To transmit the capabilities TLV in LLDP frames.
•
Network Policy
. To transmit the network policy TLV in LLDP frames.
•
Location Identification
. To transmit the location TLV in LLDP frames.
•
Extended Power via MDI - PSE
. To transmit the extended PSE TLV in LLDP frames.