Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure Switching Information
171
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The VLAN name can be up to 32 alphanumeric characters long, including blanks. The
default is blank. VLAN ID 1 always uses the name Default.
default is blank. VLAN ID 1 always uses the name Default.
The VLAN Type field identifies the type of the VLAN you are configuring. You cannot
change the type of the default VLAN (VLAN ID = 1): it is always type Default. When you
create a VLAN using this page, its type is always Static. A VLAN that is created by GVRP
registration initially uses a type of Dynamic. When configuring a dynamic VLAN, you can
change its type to Static.
change the type of the default VLAN (VLAN ID = 1): it is always type Default. When you
create a VLAN using this page, its type is always Static. A VLAN that is created by GVRP
registration initially uses a type of Dynamic. When configuring a dynamic VLAN, you can
change its type to Static.
10.
Click the Add button.
The VLAN is added to the switch.
11.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Reset the VLAN Configuration to Default Setting
To reset the VLAN configuration to default settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Switching
> VLAN > Advanced > VLAN Configuration.