Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure Switching Information
173
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
5.
Select Switching
> VLAN > Advanced > VLAN Configuration.
6.
In the Internal VLAN Allocation Base field, specify the VLAN allocation base for the routing
interface.
You can enter a value from 1 to 4093.
7.
Select the Internal VLAN Allocation Policy Ascending or Descending radio button.
This specifies a policy for the internal VLAN allocation.
8.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure VLAN Trunking
You can configure switchport mode settings on interfaces. The switchport mode defines the
purpose of the port based on the type of device it connects to and constraints the VLAN
configuration of the port accordingly. Assigning the appropriate switchport mode helps
simplify VLAN configuration and minimize errors.
purpose of the port based on the type of device it connects to and constraints the VLAN
configuration of the port accordingly. Assigning the appropriate switchport mode helps
simplify VLAN configuration and minimize errors.
To configure VLAN trunking:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.