Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

Select from the list to configure the Native VLAN ID. 

This is the native VLAN for the port, and is valid only when the port switchport mode is 
Trunk

.

Configure the Trunk Allowed VLANs. 

This is the set of VLANs of which the port can be a member when configured in Trunk 
mode. By default, this list contains all possible VLANs, even if they are not yet created. 
VLAN IDs are in the range 1 to 4093. Use a hyphen (-) to specify a range, or a comma (,) 
to separate VLAN IDs in a list. Spaces are not permitted. A zero value clears the allowed 
VLANs. An All value sets all VLANs in the range (1 to 4093).

Click the Apply button.

The updated configuration is sent to the switch.Configuration changes take effect 
immediately.

The Native VLAN Tagging field displays enabled or disabled:

When VLAN tagging is enabled, if the trunk port receives untagged frames, it forwards 
them on the native VLAN with no VLAN tag. 

When VLAN tagging is disabled, if the trunk port receives untagged frames, it includes 
the native VLAN ID in the VLAN tag when forwarding



Launch a web browser.

Enter http://<ipaddress> in the web browser address field.

The login window opens.

Enter the user name and password. 

The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.

Click the Login button. 

The System Information page displays.

Select Switching

> VLAN > Advanced > VLAN Membership.