Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Netgear
  4. M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3
  5. Manual Do Utilizador

Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

Download
Página de 700
Configure Switching Information 
187
 M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
12. 
In the DSCP Value field, configure the Voice VLAN DSCP value for the port. 
The valid range is 0 to 64. The default value is 0.
The Operational State field displays the operational status of the voice VLAN on the 
interface.
13. 
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect 
immediately.
Configure GARP Switch Settings
Note:
It can take up to 10 seconds for GARP configuration changes to take 
effect.
To configure GARP switch settings:
1. 
Launch a web browser.
2. 
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. 
Enter the user name and password. 
The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.
4. 
Click the Login button. 
The System Information page displays.
5. 
Select Switching
> VLAN > Advanced > GARP Switch Configuration. 
6. 
Select the GVRP Mode Disable or Enable radio button.
This selects the GARP VLAN registration protocol administrative mode for the switch. 
The factory default is Disable.
7. 
Select the GMRP Mode Disable or Enable radio button.
This selects the GARP multicast registration protocol administrative mode for the switch. 
The factory default is Disable.
8. 
Click the Apply button.