Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Multicast Routing
401
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the nonconfigurable data that is displayed.
Configure Global Multicast Settings
To configure global multicast settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing > Multicast > Global Configuration.
Table 150. Multicast Mroute Table
Field
Description
Group IP
The destination group IP address.
Source IP
The IP address of the multicast packet source to be combined with the
group IP to fully identify a single route whose Mroute table entry.
group IP to fully identify a single route whose Mroute table entry.
Incoming Interface
The incoming interface on which multicast packets for this source/group
arrive.
arrive.
Outgoing Interfaces
The list of outgoing interfaces on which multicast packets for this
source/group are forwarded.
source/group are forwarded.
Up Time (hh:mm:ss)
The time in seconds since the entry was created.
Expiry Time (hh:mm:ss)
The time in seconds before this entry ages out and is removed from the
table.
table.
RPF Neighbor
The IP address of the reverse path forwarding (RPF) neighbor.
Protocol
The multicast routing protocol which created this entry. The possible
values are as follows:
values are as follows:
•
PIM-DM
•
PIM-SM
•
DVMRP
Flags
The value displayed in this field is valid if the multicast routing protocol
running is PIM-SM. The possible values are RPT or SPT. For other
protocols a “------” is displayed.
running is PIM-SM. The possible values are RPT or SPT. For other
protocols a “------” is displayed.