Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Multicast Routing
402
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6.
In the Admin Mode field, select the Enable or Disable option to set the administrative
status of multicast forwarding in the router.
The default is Disable.
7.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following describes the nonconfigurable data that is displayed.
Configure the Multicast Interface
To configure the multicast interface:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing > Multicast > Interface Configuration.
Table 151. Multicast Global Configuration
Field
Description
Protocol State
The operational state of the multicast forwarding module.
Table Maximum Entry Count
The maximum number of entries in the IP multicast routing table.
Protocol
The multicast routing protocol presently activated on the router, if any.
Table Entry Count
The number of multicast route entries currently present in the multicast
route table.
route table.