Manualsbrain.com
  1. Manuais
  2. Marcas
  3. Netgear
  4. M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3
  5. Manual Do Utilizador

Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador

Download
Página de 700
Multicast Routing 
422
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual 
7. 
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect 
immediately.
Configure PIM SSM Settings
While PIM employs a specially configured rendezvous point (RP) router that serves as a 
meeting junction for multicast senders and listeners, Protocol-Independent Multicast 
Single-Source Multicast (PIM-SSM) does not use an RP. It supports only source route 
delivery trees. It is used between routers so that they can track which multicast packets to 
forward to each other and to their directly connected LANs. The SSM service model can be 
implemented with a strict subset of the PIM protocol mechanisms. Both regular IP multicast 
and SSM semantics can coexist on a single router, and both can be implemented using the 
PIM protocol. A range of multicast addresses, currently 232.0.0.0/8 in IPv4 and FF3x::/32 in 
IPv6, is reserved for SSM.
To configure PIM SSM settings:
1. 
Launch a web browser.
2. 
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3. 
Enter the user name and password. 
The default admin user name is admin and the default admin password is blank, that is, 
do not enter a password.
4. 
Click the Login button. 
The System Information page displays.
5. 
Select Routing
> Multicast > PIM > SSM Configuration. 
6. 
In the SSM Group Address field, enter the source-specific multicast group IP address.
7. 
In the SSM Group Mask field, enter the source-specific multicast group IP address 
mask.
8. 
Click the Add button.
The source-specific group is added.