Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Multicast Routing
423
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure PIM Interface
To configure the multicast PIM interface:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> Multicast > PIM > Interface Configuration.
6.
Use one of the following methods to select an interface:
•
In the Go To Interface field, enter the interface in the unit/slot/port format and click on
the Go button.
the Go button.
•
Next to the Interface column, select the check box for the interface that you want to
configure.
configure.
7.
In the Admin Mode field, select the Enable or Disable option to set the administrative
status of PIM in the router.
The default is Disable.
8.
In the Hello Interval field, enter the time in seconds between the transmission of PIM hello
messages on this interface.
The valid values are from 0 to 18000. The default value is 30.
9.
In the Join/Prune Interval, enter the time in seconds at which PIM Join/Prune messages
are transmitted on this PIM interface. The valid values are from 0 to 18000. The default
value is 60.
10.
In the BSR Border field, select the Enable or Disable option to set the bootstrap router
(BSR) border status on the selected interface.
11.
Enter the DR Priority for the selected interface.