Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Multicast Routing
437
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure the IPv6 PIM Candidate Rendezvous Point
To configure the IPv6 PIM candidate rendezvous point:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> IPv6 Multicast > IPv6 PIM > Candidate RP Configuration.
6.
From the list of interfaces, select the Interface.
7.
In the Group Address field, enter the group IPv6 address prefix transmitted in
candidate-RP-advertisements.
8.
In the Prefix Length field, enter the group IPv6 Prefix Length transmitted in
candidate-RP-advertisements
9.
In the C-RP Advertisement Interval, specify the duration in seconds at which the C-RP
messages are unicast to the bootstrap router (BSR).
The range is from 1 to 16383 seconds. The default value is 60 seconds. If this field is
submitted without any value, the default value is used.
submitted without any value, the default value is used.
10.
Click the Add button.
The candidate-RP address is added for the PIM router.
Up Time (hh:mm:ss)
The time since this PIM neighbor (last) became a neighbor of the local
router.
router.
Expiry Time (hh:mm:ss)
The minimum time remaining before this PIM neighbor is aged out.
Table 171. IPv6 PIM Neighbor
Field
Description