Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Multicast Routing
438
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure the IPv6 PIM Bootstrap Router Candidate Settings
To configure the IPv6 PIM BSR Candidate settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Routing
> IPv6 Multicast > IPv6 PIM > BSR Candidate Configuration.
6.
From the list of interfaces, select the Interface.
7.
Enter the C-BSR Hash Mask Length to be advertised in bootstrap messages.
This hash mask length is used in the hash algorithm for selecting the RP for a particular
group. The valid values are from 0 to 128. The default value is 126.
group. The valid values are from 0 to 128. The default value is 126.
8.
In the Priority field, enter the priority of the C-BSR.
9.
Enter the Advertisement Interval value of the C-BSR in seconds.
The default value is 60.
To remove the configured Hash Mask Length, and Priority values and restore them to the
default values, click the Delete button.
default values, click the Delete button.
10.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.