Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure Quality of Service
455
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The default value is untrusted.
10.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Map 802.1p Priorities to Queues
The 802.1p to Queue Mapping page also displays the Current 802.1p Priority Mapping table.
To map 802.1p priorities to queues:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select QoS > CoS > Advanced > 802.1p to Queue Mapping.
6.
Use Interface to select interfaces.
You can specify CoS configuration settings per-interface or for all CoS configurable
interfaces.
interfaces.
7.
Specify which internal traffic class to map the corresponding 802.1p value.
The queue number depends on the specific hardware. The 802.1p Priority row contains
traffic class selectors for each of the eight 802.1p priorities to be mapped. The priority
goes from low (0) to high (3). For example, traffic with a priority of 0 is for most data traffic
and is sent using best effort. Traffic with a higher priority, such as 3, might be
time-sensitive traffic, such as voice or video.
traffic class selectors for each of the eight 802.1p priorities to be mapped. The priority
goes from low (0) to high (3). For example, traffic with a priority of 0 is for most data traffic
and is sent using best effort. Traffic with a higher priority, such as 3, might be
time-sensitive traffic, such as voice or video.