Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Configure Quality of Service
457
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure CoS Interface Settings for an Interface
You can apply an interface shaping rate to all interfaces or to a specific interface.
To configure CoS settings for an interface:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select QoS > CoS> Advanced > CoS Interface Configuration.
6.
Select one of the following options to specify which interfaces are displayed on the page:
•
Select LAG to show the list of all LAG interfaces.
•
Select All to show the list of all physical as well as LAG interfaces.
7.
Use one of the following methods to select an interface:
•
Use the Go To Interface field to enter the interface in unit/slot/port format and click
the Go button.
the Go button.
The entry corresponding the specified interface is selected.
•
Select an interface from the Interface list of all CoS configurable interfaces.
8.
Use Interface Trust Mode to specify whether or not to trust a particular packet marking at
ingress.