Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Manage Device Security
495
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure Global TACACS Settings
You can configure the TACACS settings for communication between the switch and the
TACACS server you configure through the inband management port.
TACACS server you configure through the inband management port.
To configure global TACACS settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Management Security > TACACS > TACACS Configuration.
6.
In the Key String field, specify the authentication and encryption key for TACACS
communications between the switch and the TACACS server.
The valid range is 0–128. The key must match the key configured on the TACACS server.
7.
In the Connection Timeout field, specify the maximum number of seconds allowed to
establish a TCP connection between the switch and the TACACS server.
8.
In the Source Interface list, select the source interface which will be used for TACACS.
Possible values are as follows:
•
None. The primary IP address of the originating (outbound) interface is used as the
source address.
source address.
•
Routing interface. The primary IP address of a physical port is used as the source
address.
address.
•
Routing VLAN. The primary IP address of a VLAN routing interface is used as the
source address.
source address.