Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Manage Device Security
496
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
•
Routing loopback interface. The primary IP address of a routing loopback interface is
used as the source address.
used as the source address.
•
Service port. The management port source IP is used as the source address.
By default VLAN 1 is used as source interface. When the None value is displayed, it
means that the configured routing interface has become nonrouting.
means that the configured routing interface has become nonrouting.
9.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure TACACS Server Settings
You can configure up to five TACACS servers with which the switch can communicate.
To configure TACACS server settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Management Security> TACACS > TACACS Server Configuration.
6.
Use TACACS Server to configure the TACACS server IP address.
7.
Use Priority to specify the order in which the TACACS servers are used.
The valid range is 0–65535.
8.
Use Port to specify the authentication port. It must be within the range 0–65535.
9.
Use Key String to specify the authentication and encryption key for TACACS
communications between the device and the TACACS server.
The valid range is 0–128. The key must match the key used on the TACACS server.
10.
Use Connection Timeout to specify the amount of time that passes before the connection
between the device and the TACACS server time-out.