Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Manage Device Security
516
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6.
From the Login Authentication List menu, select which authentication list must be used to
log in through Telnet.
The default value is networkList.
7.
From the Enable Authentication List menu, select which authentication list must be used
to log in through Telnet for the privileged EXEC mode.
The default value is enableList.
8.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure Inbound Telnet
You can regulate new inbound Telnet sessions. If Allow New Telnet Sessions is enabled,
new inbound Telnet sessions can be established until there are no more sessions available.
If Allow New Telnet Sessions is disabled, no new inbound Telnet sessions are established.
new inbound Telnet sessions can be established until there are no more sessions available.
If Allow New Telnet Sessions is disabled, no new inbound Telnet sessions are established.
An established session remains active until the session is ended or an abnormal network
error ends the session.
To configure inbound Telnet:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.