Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Manage Device Security
518
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
Configure Outbound Telnet
You can regulate new outbound Telnet sessions. If Allow New Telnet Sessions is enabled,
new outbound Telnet sessions can be established until there are no more sessions available.
If Allow New Telnet Sessions is disabled, no new outbound Telnet sessions are established.
new outbound Telnet sessions can be established until there are no more sessions available.
If Allow New Telnet Sessions is disabled, no new outbound Telnet sessions are established.
An established session remains active until the session is ended or an abnormal network
error ends the session.
To configure outbound Telnet:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > Access > Telnet.
6.
Next to Allow new telnet sessions, select the Disable or Enable radio button.
This specifies whether the new outbound Telnet session is enabled or disabled. The
default value is Enabled so that new outbound Telnet sessions can be established until
there are no more sessions available. If it is disabled, no new outbound Telnet sessions
default value is Enabled so that new outbound Telnet sessions can be established until
there are no more sessions available. If it is disabled, no new outbound Telnet sessions