Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Manage Device Security
520
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6.
In the Serial Port Login Timeout (minutes) field, specify how many minutes of inactivity
occur on a serial port connection before the switch closes the connection.
Enter a number between 0 and 160. The factory default is 5. Entering 0 disables the
time-out.
time-out.
7.
In the Baud Rate (bps) list, select the default baud rate for the serial port connection.
You can choose from 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200 baud.
The factory default is 115200 baud.
The factory default is 115200 baud.
8.
In the Login Authentication List list, select which authentication list to use when you log in
through Telnet.
The default value is defaultList.
9.
In the Enable Authentication List list, select which authentication list to use when going
into the privileged EXEC mode.
The default value is enableList.
10.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable data that is displayed.
Configure Denial of Service Settings
To configure Denial of Service settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
Table 194. Console Port
Field
Description
Character Size (bits)
The number of bits in a character. This is always 8.
Flow Control
Whether hardware flow control is enabled or disabled. It is always
disabled.
disabled.
Stop Bits
The number of stop bits per character. It is always 1.
Parity
The parity method used on the serial port. It is always None.