Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Manage Device Security
594
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The following table describes the information displayed in the MAC Binding Table.
Configure an IP ACL
An IP or IPv6 ACL consists of a set of rules that are matched sequentially against a packet.
When a packet meets the match criteria of a rule, the specified rule action (Permit/Deny) is
taken, and the additional rules are not checked for a match. You must specify the interfaces
to which an IP ACL applies, as well as whether it applies to inbound or outbound traffic. Rules
for the IP ACL are specified or created using the IPv6 ACL Rule Configuration page.
taken, and the additional rules are not checked for a match. You must specify the interfaces
to which an IP ACL applies, as well as whether it applies to inbound or outbound traffic. Rules
for the IP ACL are specified or created using the IPv6 ACL Rule Configuration page.
To configure an IP ACL:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Security > ACL > Advanced > IP ACL.
Table 214. MAC Binding Table
Field
Description
Interface
The interface of the ACL assigned.
Direction
The selected packet filtering direction for the ACL.
ACL Type
The type of ACL assigned to selected interface and direction.
ACL ID
The ACL name identifying the ACL assigned to selected interface and
direction.
direction.
Sequence Number
The sequence number signifying the order of the specified ACL relative
to other ACLs assigned to selected interface and direction.
to other ACLs assigned to selected interface and direction.