Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Manage Device Security
595
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
The IP ACL page shows the current size of the ACL table and the maximum size of the
ACL table. The current size is equal to the number of configured IPv4 and IPv6 ACLs plus
the number of configured MAC ACLs. The maximum size is 100.
The Current Number of ACL field displays the current number of the all ACLs
configured on the switch.
configured on the switch.
The Maximum ACL displays the maximum number of IP ACL can be configured on the
switch, depending on the hardware.
switch, depending on the hardware.
6.
In the IP ACL field, specify the ACL ID or IP ACL name, which depends on the IP ACL type.
The IP ACL ID is an integer in the following range:
•
1–99
: Creates an IP basic ACL, which allows you to permit or deny traffic from a
source IP address.
•
100–199
: Creates an IP extended ACL, which allows you to permit or deny specific
types of Layer 3 or Layer 4 traffic from a source IP address to a destination IP
address. This type of ACL provides more granularity and filtering capabilities than the
standard IP ACL.
address. This type of ACL provides more granularity and filtering capabilities than the
standard IP ACL.
•
IP ACL Name
: Create an IPv4 ACL name string that includes up to 31 alphanumeric
characters in length. The name must start with an alphabetic character.
Each configured ACL displays the following information:
•
Rules
. The number of rules currently configured for the IP ACL.
•
Type
. Identifies the ACL as a basic IP ACL (with ID from 1 to 99), extended IP ACL
(with ID from 100 to 199), or for named IP ACL.
7.
Click the Add button.
The IP ACL is added to the switch configuration.
Configure Rules for an IP ACL
You can display the rules for the IP access control lists (ACL) that you created.
Note:
An implicit deny all default rule exists as the last rule of an ACL list.
This means that if an ACL is applied to a packet and if none of the
explicit rules match, the final implicit deny all rule applies and the
packet is dropped.
explicit rules match, the final implicit deny all rule applies and the
packet is dropped.
To configure rules for an IP ACL:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.