Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Monitor the System
644
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6.
From the Session ID list, select the session ID.
7.
Select the Admin Mode True (enabled) or False (disabled) radio button for the selected
session.
When a particular session is enabled, any traffic entering or leaving the source ports of
the session is copied (mirrored) onto the corresponding destination port or a remote
switched port analyzer (RSPAN) VLAN. By default, the Admin mode is disabled.
the session is copied (mirrored) onto the corresponding destination port or a remote
switched port analyzer (RSPAN) VLAN. By default, the Admin mode is disabled.
8.
Select the RSPAN Source VLAN from the list of available VLAN IDs.
9.
Select the RSPAN Destination VLAN from the list of destination interfaces.
10.
Configure the Filter Type.
IP or MAC ACLscan mirror traffic that matches a permit rule. Possible values are as
follows:
follows:
•
None
. No filter is configured for the session.
•
IP ACL
. Configure IP ACL.
•
MAC ACL
. Configure MAC ACL.
11.
Enter the Filter Name, if it is configured for the session.
12.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
Configure sFlow
sFlow is the standard for monitoring high-speed switched and routed networks. sFlow
technology is built into network equipment and gives complete visibility into network activity,
enabling effective management and control of network resources.
technology is built into network equipment and gives complete visibility into network activity,
enabling effective management and control of network resources.
The sFlow monitoring system consists of an sFlow Agent (embedded in a switch or router or
in a standalone probe) and a central sFlow Collector. The sFlow Agent uses sampling
technology to capture traffic statistics from the device it is monitoring. sFlow datagrams are
used to immediately forward the sampled traffic statistics to an sFlow Collector for analysis.
in a standalone probe) and a central sFlow Collector. The sFlow Agent uses sampling
technology to capture traffic statistics from the device it is monitoring. sFlow datagrams are
used to immediately forward the sampled traffic statistics to an sFlow Collector for analysis.