Netgear M4300-24X24F (XSM4348S) - Stackable Managed Switch with 48x10G including 24x10GBASE-T and 24xSFP+ Layer 3 Manual Do Utilizador
Monitor the System
646
M4200 and M4300 Series ProSAFE Managed Switches Web Management User Manual
6.
In the Source Interface list, select the management interface that is used for sFlow Agent.
Possible values are as follows:
•
None
•
Routing interface
•
Routing VLAN
•
Routing loopback interface
•
Tunnel interface
•
Service port
By default, VLAN 1 is used as the source interface.
7.
Click the Apply button.
The updated configuration is sent to the switch. Configuration changes take effect
immediately.
immediately.
The following table describes the nonconfigurable information.
Configure sFlow Agent Advanced Settings
To configure sFlow agent advanced settings:
1.
Launch a web browser.
2.
Enter http://<ipaddress> in the web browser address field.
The login window opens.
3.
Enter the user name and password.
The default admin user name is admin and the default admin password is blank, that is,
do not enter a password.
do not enter a password.
4.
Click the Login button.
The System Information page displays.
5.
Select Monitoring
> sFlow > Advanced > sFlow Agent Information.
Table 225. sFlow Basic Agent Information
Field
Description
Agent Version
Uniquely identifies the version and implementation of this MIB. The version
string must use the following structure: MIB Version;Organization;Software
Revision where:
string must use the following structure: MIB Version;Organization;Software
Revision where:
•
MIB Version: For example, 1.3, the version of this MIB
•
Organization: NETGEAR, Inc.
•
Revision: 1.0
Agent Address
The IP address associated with this agent.