Netgear GS752TPS(B) - ProSAFE 48-Port Gigabit Stackable Smart Switch with PoE and 4 SFP uplinks Guia Do Programa

MST Configuration

Use the Spanning Tree MST Configuration page to configure Multiple Spanning Tree (MST) 
on the switch. 

To display the Spanning Tree MST Configuration page, click Switching > STP > Advanced > 
MST Configuration.

To configure an MST instance:

To add an MST instance, configure the MST values and click Add:

MST ID. Specify the ID of the MST to create. Valid values for this are between 1 and 

4094.

Priority. Specifies the bridge priority value for the MST. When switches or bridges are 

running STP, each is assigned a priority. After exchanging BPDUs, the switch with the 
lowest priority value becomes the root bridge. The bridge priority is a multiple of 4096. 
If you specify a priority that is not a multiple of 4096, the priority is automatically set to 
the next lowest priority that is a multiple of 4096. For example, if the priority is 
attempted to be set to any value between 0 and 4095, it will be set to 0. The default 
priority is 32768.The valid range is 0–61440.

VLAN ID. The menu contains all VLANs configured on the switch. Select a VLAN to 

associate with the MST instance.

To delete an MST instance, select the check box next to the instance and click Delete.

To modify an MST instance, select the check box next to the instance to configure, update 
the values, and click Apply. You can select multiple check boxes to apply the same setting 
to all selected ports.

Click Cancel to cancel the configuration on the screen and reset the data on the screen to 
the latest value of the switch.