Netgear GS752TPS(B) - ProSAFE 48-Port Gigabit Stackable Smart Switch with PoE and 4 SFP uplinks Guia Do Programa

For each configured instance, the information described in the following table displays on the 
page.

Bridge Identifier

The bridge identifier for the selected MST instance. It is made up using the bridge priority 
and the base MAC address of the bridge.

Time Since 
Topology 
Change

Displays the total amount of time since the topology of the selected MST instance last 
changed. The time is displayed in hour/minute/second format, for example, 5 hours, 10 
minutes, and 4 seconds.

Topology 
Change Count

Displays the total number of times topology has changed for the selected MST instance.

Topology 
Change

Indicates whether a topology change is in progress on any port assigned to the selected 
MST instance. The possible values are True or False.

Designated Root Displays the bridge identifier of the root bridge, which is made up from the bridge priority 

and the base MAC address of the bridge.

Root Path Cost

Displays the path cost to the Designated Root for this MST instance.

Root Port

Indicates the port to access the Designated Root for this MST instance.

 

MST Port Configuration

Use the Spanning Tree MST Port Configuration page to configure and display Multiple 
Spanning Tree (MST) settings on a specific port on the switch.

To display the Spanning Tree MST Port Status page, click Switching > STP > Advanced > 
MST Port Configuration. The following figures show the left and right portions of the Web 
page.