Netgear GS752TPS(B) - ProSAFE 48-Port Gigabit Stackable Smart Switch with PoE and 4 SFP uplinks Guia Do Programa

To disable IGMP snooping on a VLAN and remove it from the list, select the check box next 
to the VLAN ID and click Delete.

To modify IGMP snooping settings for a VLAN, select the check box next to the VLAN ID, 
update the desired values, and click Apply.

IGMP Snooping Querier

IGMP snooping requires that one central switch or router periodically query all end-devices 
on the network to announce their multicast memberships. This central device is the IGMP 
querier. The IGMP query responses, known as IGMP reports, keep the switch updated with 
the current multicast group membership on a port-by-port basis. If the switch does not 
receive updated membership information in a timely fashion, it will stop forwarding multicasts 
to the port where the end device is located.

These pages enable you to configure and display information on IGMP snooping queriers on 
the network and, separately, on VLANs.

The IGMP Snooping Querier feature contains links to the following pages:

Use this page to enable or disable the IGMP Snooping Querier feature, specify the IP 
address of the router to perform the querying, and configure the related parameters. 

To access this page, click Switching

> Multicast > IGMP Snooping Querier > IGMP 

Snooping > Querier Configuration.