Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series Guia Do Administrador

The switch supports system file uploads from the switch to a remote system by using either 
TFTP or HTTP. 

The Upload menu contains links to the features described in the following sections.

Use the TFTP File Upload screen to upload configuration (ASCII), log (ASCII), and image 
(binary) files from the switch to a TFTP server on the network. 



Select Maintenance 





 TFTP File Upload.

From the File Type list, specify the type of file you want to upload. The factory default is 

Archive.

Archive. Retrieve the image from the operational flash.

Text Configuration. Retrieve the stored text configuration.

Error Log. Retrieve the system error (persistent) log, sometimes referred to as the 
event log.

Trap Log. Retrieve the system trap records.

Buffered Log. Retrieve the system buffered (in-memory) log. The factory default is 

Archive.

Tech Support. Retrieve the tech support file, which contains a variety of hardware, 
software, and configuration information that can assist in device and network 
troubleshooting.

Crash Logs. Specify crash logs to retrieve them. 

The Image Name field is only visible when the selected File Type is Archive. If you are 
uploading a switch image (Archive), use the Image Name list to select the software image 
on the switch to upload to the management system.

From the Server Address Type list, select the format to use for the address you type in the 
TFTP Server Address field:

IPv4. Indicates that the TFTP server address is an IP address in dotted-decimal 
format.

DNS. Indicates that the TFTP server address is a host name.

In the Server Address field, specify the IP address or host name of the TFTP server. 

The address you type must be in the format indicated by the TFTP server address type.