Netgear S3300-28X (GS728TX) - ProSAFE S3300 Smart Switch Series Guia Do Administrador

Click Update to update the page with the latest information on the switch.







The CPU Threshold screen allows you to configure thresholds that, when crossed, trigger a 
notification. The notification is done via SNMP trap and SYSLOG messages.

Define the CPU Threshold fields listed in 

.

Rising Threshold

Notification is generated when the total CPU utilization exceeds this threshold 
value over the configured time period. The range is 1 to 100.

Rising Interval

The utilization monitoring time period can be configured from 5 seconds to 
86400 seconds in multiples of 5 seconds.

Falling Threshold

Notification is triggered when the total CPU utilization falls below this level for a 
configured period of time. The Falling utilization threshold must be equal or less 
than Rising threshold value. The Falling utilization threshold notification is made 
only if previously a Rising threshold notification was done. Configuring the 
Falling utilization threshold and time period is optional. If the Falling CPU 
utilization parameters are not configured, then it takes the same value as Rising 
CPU utilization parameters. Range is 1 to 100.

Falling Interval

The utilization monitoring time period can be configured from 5 seconds to 
86400 seconds in multiple of 5 seconds.

Free Memory Threshold

This is non-configurable data and is the CPU Free Memory Threshold value.

Click the Apply button. 

The system parameters are applied, and the device is updated.

Click the Cancel button to cancel the configuration on the screen, and reset the data on the 
screen to the latest value of the switch.

Use the USB Device Information screen to display the USB device status, memory 
statistics, and directory details.

Available Memory

The available memory space for the switch in KBytes.

Unit No

Select the Unit to display the CPU Utilization information. Select All to display 
the CPU Utilization information for all units.