Netgear S3300-28X-PoE+ (GS728TXP) - ProSAFE S3300 Smart Switch Series Guia Do Administrador
Monitoring the System
282
S3300 Smart Switch
The rest of the screen displays the number of persistent messages the system has logged
and the persistent log messages.
and the persistent log messages.
To view log messages stored in persistent storage:
1.
Select Monitoring
Logs > FLASH Log.
2.
Next to Logs to be Displayed, select the log messages to view:
•
Current Logs. View the messages logged to persistent storage during the current
boot cycle.
boot cycle.
•
Previous Logs. View the messages logged to persistent storage during the previous
boot cycle. The screen displays up to 64 messages logged to persistent storage
during the previous boot cycle. The persistent log file from the previous boot cycle
stores the following messages:
boot cycle. The screen displays up to 64 messages logged to persistent storage
during the previous boot cycle. The persistent log file from the previous boot cycle
stores the following messages:
-
Up to 32 startup messages, which are messages that occurred immediately after
the previous boot cycle completed (system startup).
the previous boot cycle completed (system startup).
-
Up to 32 operational messages, which are messages that occurred immediately
preceding the last boot.
preceding the last boot.
3.
Total Number of Messages. Total number of persistent log messages stored on the switch.
The maximum number of persistent log messages displayed on the switch is 64.
The maximum number of persistent log messages displayed on the switch is 64.
4.
Description: <15>Aug 24 05:34:05 STK0 MSTP[2110]: mspt_api.c(318) 237 %% Interface
12 transitioned to root state on message age timer expiry
12 transitioned to root state on message age timer expiry
The above example indicates a user-level message (1) with severity 7 (debug) on a
system that is not stacked and generated by component MSTP running in thread id 2110
on Aug 24 05:34:05 by line 318 of file mstp_api.c. This is the 237th message logged.
Messages logged to a collector or relay via syslog have an identical format to the above
message.
system that is not stacked and generated by component MSTP running in thread id 2110
on Aug 24 05:34:05 by line 318 of file mstp_api.c. This is the 237th message logged.
Messages logged to a collector or relay via syslog have an identical format to the above
message.
Server Log
Use the Server Log screen to allow the switch to send log messages to the remote logging
hosts configured on the system.
hosts configured on the system.
To configure local log server settings:
1.
Select Monitoring
Logs > Server Log.
2.
Next to Admin Status, select one of the following:
•
Enable. Send log messages to all configured hosts (syslog collectors or relays) using
the values configured for each host.
the values configured for each host.
•
Disable. Stop logging to all syslog hosts. Disable means no messages will be sent to
any collector/relay.
any collector/relay.
3.
In the Local UDP Port field, specify the port on the switch from which syslog messages are
sent.
sent.
4.
Click the Apply button.
The Server Log Configuration area displays the following information: