Netgear S3300-28X-PoE+ (GS728TXP) - ProSAFE S3300 Smart Switch Series Guia Do Administrador
Monitoring the System
284
S3300 Smart Switch
To modify the settings for an existing host:
1.
Select the check box next to the host to modify.
2.
Change the desired information.
3.
Click the Apply button.
Trap Logs
Use the Trap Logs screen to view information about the SNMP traps generated on the
switch.
switch.
To view trap log information, select Monitoring
Logs > Trap Logs. The Trap Logs screen
displays.
The following table describes the Trap Log information displayed on the screen.
The screen also displays information about the traps that were sent.
Table 98. Trap log information
Field
Description
Log
The sequence number of this trap.
System Up Time
The time at which this trap occurred, expressed in days, hours, minutes, and
seconds since the last reboot of the switch.
seconds since the last reboot of the switch.
Trap
Information identifying the trap.
Table 97. Trap log statistics
Field
Description
Number of Traps Since
Last Reset
Last Reset
The number of traps that have occurred since the switch last reboot.
Trap Log Capacity
The maximum number of traps stored in the log. If the number of traps exceeds the
capacity, the entries will overwrite the oldest entries.
capacity, the entries will overwrite the oldest entries.
Number of Traps Since
Log Last Viewed
Log Last Viewed
The number of traps that have occurred since the traps were last displayed.
Displaying the traps by any method (such as terminal interface display, web
display, or upload file from switch) will cause this counter to be cleared to 0.
Displaying the traps by any method (such as terminal interface display, web
display, or upload file from switch) will cause this counter to be cleared to 0.