Netgear S3300-28X-PoE+ (GS728TXP) - ProSAFE S3300 Smart Switch Series Guia Do Administrador
Maintenance
288
S3300 Smart Switch
Reset
The Reset menu contains links to the features described in the following sections.
•
•
Device Reboot
Use the Device Reboot screen to reboot the switch.
To reboot the switch:
1.
Select Maintenance
Reset
Device Reboot.
2.
In the Reboot Unit No. field, select the unit to reset. When multiple units are connected in a
stack, select All to reset all the units in the stack (in other words, the whole stack) or select
the unit number to reset only the specific unit.
stack, select All to reset all the units in the stack (in other words, the whole stack) or select
the unit number to reset only the specific unit.
3.
Select the check box.
4.
Click the Apply button.
The switch resets immediately. The management interface is not available until the switch
completes the boot cycle. After the switch resets, the login screen displays.
completes the boot cycle. After the switch resets, the login screen displays.
Factory Default
Use the Factory Default screen to reset the system configuration to the factory default values.
Note:
If you reset the switch to the default configuration, the IP address is
reset to 192.168.0.239, and the DHCP client is enabled. If you loose
network connectivity after you reset the switch to the factory defaults,
see
reset to 192.168.0.239, and the DHCP client is enabled. If you loose
network connectivity after you reset the switch to the factory defaults,
see
To reset the switch to the factory default settings:
1.
Select Maintenance
Reset
Factory Default.
Figure 61. Factory Default
2.
Select the check box on the screen.
3.
Click the Apply button.
The switch resets immediately.