Netgear S3300-28X-PoE+ (GS728TXP) - ProSAFE S3300 Smart Switch Series Guia Do Administrador
Configure System Information
48
S3300 Smart Switch
IPv6 Network Neighbor
Use the IPv6 Network Neighbor screen to view information about the IPv6 neighbors the
device has discovered through the network interface by using the Neighbor Discovery
Protocol (NDP).
device has discovered through the network interface by using the Neighbor Discovery
Protocol (NDP).
To display the IPv6 Network Neighbor screen:
Select System
Management
IPv6 Network Neighbor.
describes the information the IPv6 Network Neighbor screen displays about each
IPv6 neighbor that the switch has discovered.
Table 13. IPv6 neighbor table fields
Field
Description
IPv6 Address
The IPv6 address of the neighbor.
MAC Address
The MAC address associated with an interface.
IsRtr
Indicates whether the neighbor is a router. If the neighbor is a router, the value is
True. If the neighbor is not a router, the value is False.
True. If the neighbor is not a router, the value is False.
Neighbor State
The state of the neighbor cache entry. The following are the states for dynamic
entries in the IPv6 neighbor discovery cache:
entries in the IPv6 neighbor discovery cache:
•
Reach. The neighbor is reachable through the network interface.
•
Stale. The neighbor is not known to be reachable, and the switch will begin
the process to reach the neighbor.
the process to reach the neighbor.
•
Delay. The neighbor is not known to be reachable, and upper-layer
protocols are attempting to provide reachability information.
protocols are attempting to provide reachability information.
•
Probe. The neighbor is not known to be reachable, and the device is
attempting to probe for this neighbor.
attempting to probe for this neighbor.
•
Unknown. The reachability status cannot be determined.
Last Updated
The amount of time that has passed since the neighbor entry was last updated.